Epaline 700 Series polyether based

TPU for Extrusion

EPALINE 700 series products are suitable for extrusion of cables, hoses, tubes, films, profiles, and belts. They are available from 72 shore A to 50 shore D, with inherently excellent resistance to hydrolysis and microbial attack, and very good flexibility at cold temperatures, thanks to their formulations based on PTMEG polyether polyols. They are manufactured in very narrow MFI/MVR ranges thanks to the special production process in EPAFLEX.

TYPICAL PROPERTIES	METHOD	UNIT
Density	ISO 1183	Kg/dm³
Hardness Sh A	ISO 868	Shore A
Hardness Sh D	ISO 868	Shore D
Mod 50%	EN 12803	MPa
Mod 100%	EN 12803	MPa
Mod 300%	EN 12803	MPa
Elongation at break	EN 12803	%
Tensile strength	EN 12803	MPa
Tear strength	ISO 34	KN/m
Abrasion resistance	EN 12770	mm³
Glass transition temp. (Tg)*	DMA	°C
PROCESS
Injection molding
Extrusion
CHARACTERISTICS
Transparent
Matt
FSM version available

780 A 15 15	785 A 15 12	785 A 15 15	785 A 15 15 M	790 A 15 15	795 A 15 15	770 A 15 15 FSM	745 D 15 15 FSM	750 D 15 15 FSM	786 A 10 W
1,11	1,11	1,11	1,11	1,13	1,14	1,09	1,14	1,17	1,15
80	85	85	87	90	93	72	95	96	85
							44	52
4		5,2	6,3	8	9,5	370	11	2500	750
5		6,3	7,5	9,5	12	480	12,5	3000	900
8,5		11	12	22,5	28	870	30	4700	1600
600	500	550	650	500	450	720	450	450	580
45	45	45	45	50	45	3000 PSI	50	6000 PSI	3700 PSI
70	90	85	80	100	110	300 PLI	120	900 PLI	380 PLI
30	35	30	45	30	30	< 60	35		40
-40	-39	-39	-39	-35	-30		-30		-40

TPU for Extrusion

Request the technical data sheet of the Epaline 700 Series

Fill out the form and select the products for which you would like to receive the technical data sheet